A GFCI outlet with night light combines two practical features into a single device, ground-fault protection and a built-in LED that illuminates dark hallways, bathrooms, and kitchens without taking up an extra outlet slot. It’s a simple upgrade that adds both safety and convenience to any room where water or low visibility is a concern.
But not all combo units are created equal. Some have better light output, others offer superior surge protection, and a few cut corners on build quality. Picking the wrong one means dealing with dim LEDs, unreliable GFCI mechanisms, or units that don’t meet current electrical codes. As licensed electricians serving the Greater Phoenix Metro Area, our team at AZ DC Electric installs and replaces GFCI outlets regularly, so we know which products hold up and which ones don’t.
Below, we break down six of the best options available right now, along with what to look for before you buy.
1. AZ DC Electric GFCI outlet with night light installation
If you want a GFCI outlet with night light installed correctly from the start, hiring a licensed electrician removes the guesswork. AZ DC Electric provides residential and commercial GFCI installations across the Greater Phoenix Metro Area, with every job backed by a 5-year workmanship guarantee and upfront pricing before work begins.
Best for
This option suits homeowners who want professional-grade installation without sourcing parts, decoding wiring diagrams, or worrying about code compliance. It also works well for anyone whose existing outlet location has outdated wiring or no ground connection, both conditions that make DIY installation genuinely risky.
When you should hire a pro
DIY GFCI work becomes a real liability when your home has aluminum wiring, two-wire ungrounded circuits, or a panel that’s already running at capacity. Each of these situations can turn a simple outlet swap into a larger electrical project that requires professional assessment.
If your current bathroom or kitchen outlet trips repeatedly and won’t reset, that’s a signal the circuit itself needs inspection before any new outlet goes in.
What the install includes
AZ DC Electric technicians will remove the old outlet and test the circuit before installing the new GFCI unit. After installation, they verify proper grounding, confirm the device trips and resets correctly, and clean up the work area before leaving.
Cost factors in the Phoenix Metro Area
Labor rates depend on outlet accessibility and the condition of existing wiring. A simple swap in a standard bathroom costs less than a job requiring new wire runs or junction box modifications. You receive upfront pricing before any work starts, so there are no surprises on the final invoice.
Safety checks to request before the electrician leaves
Before your technician packs up, ask them to test the trip and reset function using the built-in test button and a plug-in outlet tester. Also confirm the integrated night light activates properly and that the wall plate sits flush with no exposed gaps around the edges.
2. Leviton GFNL1-W SmartlockPro slim GFCI with guide light
The Leviton GFNL1-W is one of the most widely installed GFCI outlet with night light combos on the market, and for good reason. It pairs Leviton’s proven SmartlockPro protection mechanism with a built-in amber guide light, all in a slim profile that fits most standard electrical boxes without issue.
Best for
This outlet works best for bathrooms, hallways, and bedrooms where you want reliable ground-fault protection and a low-level light source at night without adding a separate plug-in nightlight.
Key specs and features
The GFNL1-W is a 15-amp, 125-volt receptacle with a self-test function that automatically verifies protection status. Its SmartlockPro design prevents the outlet from powering up if wired incorrectly, which adds a meaningful layer of protection during installation.
This self-test feature makes the Leviton GFNL1-W a strong pick if your home’s electrical work gets inspected regularly.
Night light performance and behavior
The amber LED activates automatically in low-light conditions using a built-in photosensor. Brightness is intentionally subtle, enough to navigate a dark room without disturbing sleep.
Installation notes and wiring tips
It accepts back-wired and side-wired connections, giving you flexibility in tight boxes. Always turn off the circuit breaker before starting.
Price range and where to buy
You can find the GFNL1-W on Amazon for roughly $18 to $25 per unit.
3. Legrand radiant 1597NTLTRWCCD4 GFCI with night light
The Legrand radiant 1597NTLTRWCCD4 is a 15-amp GFCI outlet with night light built for homeowners who want a clean, modern look without sacrificing protection. Its radiant design line gives it a flatter, more refined appearance compared to traditional bulky GFCI units.
Best for
This outlet fits best in updated bathrooms, laundry rooms, and kitchens where the wall plate aesthetic matters as much as the function. It suits anyone already using Legrand’s radiant collection throughout the home and wants a consistent look across all devices.
Key specs and features
The unit runs on 15 amps at 125 volts and includes tamper-resistant shutters for added child safety. Its self-test GFCI mechanism monitors protection status automatically without requiring manual testing.
Tamper-resistant GFCI outlets meet current NEC code requirements for kitchens and bathrooms, which matters if your home undergoes inspection.
Night light behavior and control limits
The LED activates automatically when ambient light drops below a set threshold. You cannot manually override the sensor, so the light stays off during daylight regardless of your preference.
Installation notes and wall plate fit
The outlet is designed to pair with Legrand radiant wall plates, sold separately. Standard plates from other brands may not align flush, so confirm compatibility before purchasing.
Price range and where to buy
Expect to pay $25 to $35 per unit on Amazon, depending on current availability and bundled plate options.
4. Eaton 15A GFCI night light receptacle
The Eaton 15A GFCI night light receptacle is a solid, no-frills option for homeowners who want dependable ground-fault protection and a built-in night light at a lower price per unit than most name-brand competitors.
Best for
This outlet works best in utility areas, garages, and secondary bathrooms where performance matters more than appearance. It’s also a practical choice if you’re replacing several outlets at once and want to keep the total project cost manageable.
Key specs and features
Operating at 15 amps and 125 volts, this unit meets standard residential circuit requirements. It includes a manual test and reset button for verifying protection status and carries UL listing for safety compliance.
Night light style and brightness expectations
The integrated LED produces a soft, low-level glow that activates automatically when ambient light drops. Brightness is functional rather than decorative, so it won’t flood a large room, but it gives you enough visibility to navigate safely at night.
This makes the Eaton a better fit for hallways and bathrooms than open-plan spaces where stronger light output would be expected.
Installation notes and compatibility checks
This gfci outlet with night light fits a standard single-gang electrical box and accepts both back-wire and side-wire connections. Check your box depth before purchasing, since shallow boxes can make seating the outlet flush more difficult.
Price range and where to buy
You can find this unit on Amazon for roughly $15 to $22 per outlet.
5. ELEGRP EG19L20T-0103 20A GFCI with night light 3-pack
The ELEGRP EG19L20T-0103 gives you a 20-amp GFCI outlet with night light bundled in a three-pack, making it a practical choice when you need to replace multiple outlets across a kitchen, laundry room, or garage in one project.
Best for
This pack works best for homeowners updating several outlets at once in 20-amp circuits, particularly in kitchens and laundry rooms where appliance loads demand the higher amperage rating.
Key specs and what comes in the box
Each unit operates at 20 amps and 125 volts and includes a built-in LED night light with an automatic photosensor. The three-pack ships with three GFCI receptacles, but wall plates are sold separately, so factor that into your total cost before purchasing.
Box depth and installation notes
These outlets require a box depth of at least 2.5 inches to seat properly. Shallow or older single-gang boxes may not accommodate the unit, so measure your existing box before ordering.
Confirm your box depth before purchasing to avoid returning the unit after opening the package.
When a 20A GFCI makes sense
A 20-amp GFCI is the right call when your circuit breaker is rated at 20 amps and the wiring uses 12-gauge conductors. Installing a 15-amp outlet on a 20-amp circuit wastes the circuit’s capacity and can cause problems with high-draw appliances.
Price range and where to buy
You can find the three-pack on Amazon for roughly $35 to $45 total, which brings the per-unit cost well below most individually sold 20-amp GFCI options.
6. Legrand radiant 2097NTLTRW 20A GFCI with night light
The Legrand radiant 2097NTLTRW brings the same refined aesthetic of the radiant line to a 20-amp circuit, making it the premium pick for high-load locations that also need built-in night light coverage.
Best for
This outlet suits kitchens, laundry rooms, and garages where 20-amp circuits are standard and appearance still matters. If you’re already using Legrand radiant devices elsewhere in your home, this unit keeps your wall plate design consistent across rooms.
How to confirm your circuit is 20 amp
Check your electrical panel for a breaker labeled 20A that corresponds to the outlet’s circuit. You can also look at the existing wire gauge: 20-amp circuits use 12-gauge wire, while 15-amp circuits use 14-gauge wire.
If you’re unsure which circuit powers a specific outlet, a licensed electrician can trace and confirm it before you purchase a replacement unit.
Key specs and features
This gfci outlet with night light operates at 20 amps and 125 volts and includes Legrand’s self-test protection mechanism along with tamper-resistant shutters for child safety.
Installation notes and downstream protection
The 2097NTLTRW supports downstream protection, meaning you can wire additional standard outlets on the same circuit through this single GFCI unit. Wall plates are sold separately and should match the radiant line for a proper flush fit.
Price range and where to buy
Expect to pay $30 to $42 per unit on Amazon, making it the highest per-unit cost in this guide but also the most design-forward 20-amp option available.
Final take
Each gfci outlet with night light on this list solves a real problem, combining ground-fault protection with built-in lighting in a single device. Your best pick depends on circuit amperage, box depth, and how much the aesthetics matter to you. The Leviton GFNL1-W covers most standard 15-amp bathrooms and hallways. The ELEGRP three-pack makes the most financial sense when you’re replacing multiple outlets at once. The Legrand radiant options suit homeowners who want a uniform, design-forward look throughout the home.
If your home has older wiring, aluminum conductors, or circuits you can’t confidently identify, skip the DIY route. Getting the outlet type wrong wastes money, and incorrect GFCI wiring creates real safety risks that a plug-in tester won’t always catch. The team at AZ DC Electric handles installations across the Greater Phoenix Metro Area with upfront pricing and a 5-year workmanship guarantee. Book a GFCI outlet installation and get it done right the first time.